Straightening and Cutting Machines

PRO-10 Machine (-10), up to 10 mm

The PRO-10 machine is used to unbend metal wire and reinforcement bars from bobbins and reels. Due to its compactness, easy operation which does not require complicated adjustment works, special knowledge and training, PRO-10 is in steady demand in Russia. There are no equivalents of this machine in Russia.

PRO-10 Machine (-10), up to 10 mm

PRO-12 Machine (-12), Ø up to 12 mm

The PRO-12 automatic straightening and cutting machine is used to straighten and cut reinforcement bars with the diameter up to 12 mm. High degree of automation and high broaching speed allows you to get straight bars of necessary length simply and quickly. The PRO-12 machine is equipped with a control panel through which you can specify the required size and number of bars for automatic straightening and cutting. The machine can be easily and quickly transported to desired location due to its small size. There are no equivalents of this machine in Russia.

PRO-12 Machine (-12), Ø up to 12 mm

PRO-14 Machine (-14), Ø up to 14 mm

The PRO-14 straightening and cutting machine is used to straighten and cut reinforcement bars with the diameter up to 14 mm. High degree of automation and high broaching speed allows you to get straight bars of necessary length simply and quickly. Straightening does not result in the material’s strength degradation. This machine with high output is easy to operate and maintain.

PRO-14 Machine (-14), Ø up to 14 mm